150 specifications across 6 categories
52 specifications
37 specifications
| Product | Standard |
|---|---|
| Retaining Rings for Bores - Heavy Type(3 versions) | DIN 472 |
| Retaining Rings for Bores - Normal Type(2 versions) | DIN 472 |
| Metric Internal Retaining Rings - 3BM1(2 versions) | ANSI B 27.7 |
| NA8 Internal Retaining Rings | ASME B 18.27 |
| Retaining Rings with Lugs (Internal Circlips) for Use In Bores |
24 specifications
| Product | Standard |
|---|---|
| Flat Wire Stopper Ring for Holes(4 versions) | QC /T 344 - 1999 |
| Roundwire Snap Rings for Shaft(3 versions) | CNS 9075 - 1998 |
| Flat Wire Stopper Ring for Shafts(2 versions) | JIS B 2804 |
| Roundwire Snap Rings for Hole(2 versions) | CNS 9075 - 1998 |
| Round Wire Snap Rings for Hole |
22 specifications
| Product | Standard |
|---|---|
| “E” Rings(4 versions) | GB /T 896 - 2020 |
| Lock Washers (retaining washers for shafts)(3 versions) | DIN 6799 |
| Lock Washers (Retaining Washers for Shafts) | JIS B 2804 |
| NA5 External Retaining Rings，Reinforced E-Tvpe | ASME B 18.27 |
| Retaining Rings (Crescent Type) M1800/H/DC | YJT 7014 |
13 specifications
| Product | Standard |
|---|---|
| Lock Rings with Cone Pin | GB /T 883 - 1986 |
| Rings for Shoulder - Heavy Series | GB /T 886 |
| Rolling Bearings - Snap Ring | GB /T 305 - 1989 |
| Double Holes Circlip with Shaft End | ZQ 4349 - 1986 |
| Lock Rings at the End of Shaft with Screw | GB 891 - 1986 |
2 specifications
| Product | Standard |
|---|---|
| Pliers for Retaining Rings for Bores | DIN 5256 - 1997 |
| Pliers for Retaining Rings for Shaft | DIN 5254 - 1997 |
| DIN 984 - 2021 |
| Retsining Rings for Housing Bores - Normai Type | UNI 7437 - 1975 |
| Spring Retaining Rings-Axially Mounted Circlips for Shafts Bores - Normal Type | NF E 22 |
| Bowed Rings for Bores M1301/JW | YJT 7009 |
| Bowed Rings for Holes (imperial standard) N1301/NJW | YJT 7018 |
| Circlips for Bores - Nominal Type and Heavy Type | DIN 472 |
| Circlips for Hole-Heavy Style | ZQ 4341 - 2006 |
| Circlips for Holes | JIS B 2804 |
| Circlips for Holes (imperial standard) - V Type (N1308/NJV) | YJT 7021 |
| Circlips for Holes (imperial standard) with Chamfer - N1302/NJB | YJT 7019 |
| Circlips for Holes - Type A | GB /T 893.1 - 1986 |
| Circlips for Holes - Type B | GB /T 893.2 - 1986 |
| Inverted Internal Retaining Rings | YJT 7032 |
| Large Circlips for Hole | ZQ 4343 - 1997 |
| Large Circlips For Hole | ZQ 4343 - 2006 |
| Retaining Rings for Bores - Type A (Standard) | GB /T 893 |
| NA11 Inverted Internal Retaining Rings | ASME B 18.27 |
| NA13 Beveled Internal Retaining Rings | ASME B 18.27 |
| NA2 Internal Retaining Rings | ASME B 18.27 |
| Push-In Fix for Bores (M1355/ZJ/DTI) | YJT 7035 |
| Retaining Rings for Bores - Type B (Heavy) | GB /T 893 |
| Retaining Rings with Lugs (Internal Circlips) for use in Bores | DIN 984 - 2013 |
| Rings for Bores (Heavy Duty) D1360/JS/DHR | YJT 7007 |
| Spring Retaining Rings - Axially Mounted Circlips for Shafts Bores - Heavy Type | NF E 22 |
| Spring Retaining Rings with Lugs for use in Bores (Internal Circlips) | DIN 984 |
| Stainless Steel - Circlips for Hole | QJ 3245.1 - 2005 |
| V-rings for Bores M 1308/JV/DHI | YJT 7011 |
| Bevelled Ring for Bores M1302/JB/DVH | YJT 7010 |
| Circlips for Hole | Q 430 |
| Circlips for Holes (imperial standard) N1300/NJ | YJT 7017 |
| Circlips for Holes (imperial standard) with Chamfer (N1303/NDB) | YJT 7020 |
| Internal Retaining Rings | JIS B 2804 |
| L-Rings for Bores 984L/JL | YJT 7005 |
| GB /T 895.1 - 1986 |
| Round Wire Snap Rings for Piston Pins - Form A | DIN 73130 |
| Roundwire for Shaft | Q 437 |
| Securing Parts for Rolling Bearings-Snap Rings for Bearings with Ring Groove | DIN 5417 |
| Snap Rings with Rectangular Profile for Bores | DIN 9928 - 2021 |
| Snap Rings with Rectangular Profile for Shafts | DIN 9927 - 2021 |
| Flat Wire Stopper Ring for Holes M2400/SW/WR | YJT 7016 |
| Flat Wire Stopper Ring For Shafts | QC /T 345 - 1999 |
| Flat Wire Stopper Ring for Shafts M2300/SB | YJT 7015 |
| Round Wire Circlips | GB 921 - 1986 |
| Round Wire Snap Ring for Bores - Type B for Bores (RB) | DIN 7993 |
| Round Wire Snap Rings for Bores | DIN 9926 - 2019 |
| Round Wire Snap Rings for Piston Pins - Form C | DIN 73130 |
| Round Wire Snap Rings for Shaft | GB 895.2 - 1986 |
| Round Wire Snap Rings for Shaft - Type A for Shafts (RW) | DIN 7993 |
| Securing Parts for Rolling Bearings - Snap Rings for Bearings with Ring Groove | DIN 5417 |
| Roundwire for Hole | Q 438 |
| Snap Rings | DIN 9045 - 1974 |
| Snap Rings for Bearings with Ring Groove | CNS 9072 - 1996 |
| Specification for ring - Round wire snap rings | GB 959.2 - 1986 |
| Retaining Rings for Shafts, Type E | UNI 7434 |
| Retaining Washers for Shafts | DIN 6799 - 2017 |
| Bowed Retaining Rings (imperial standard) (N1501/NRJ/NRX) | YJT 7028 |
| E Ring, Retaining, External, Reinforced (Reduced Section Type) | MS 3215 |
| K Type Split Washers | YJT 7002 - 2012 |
| Kliprings (U-shaped) (N1504/NKP) | YJT 7029 |
| Lock washers (retaining washers for shafts) | JIS B 2804 |
| Metric E-Ring external Retaining Rings - 3CM1 | ANSI B 27.7 |
| NA3 External Retaining Rings - Type E | ASME B 18.27 |
| NA6 External Retaining Rings - Type C | ASME B 18.27 |
| NA9 External Retaining Rings - Type E | ASME B 18.27 |
| Retaining Rings - E Type | JIS B 2805 - 1978 |
| Retaining Rings (imperial standard) - Crescent Type (N1800/NH） | YJT 7031 |
| Split Washers | CNS 9076 - 1996 |
| Split Washers 9133/NRL | YJT 7006 |
| U Type Split Washers | YJT 7003 |
| C Type Split Washers | YJT 7001 |
| Lock Rings with Screw and Circlip | GB 885 - 1986 |
| Lock Rings with Screws | GB 884 - 1986 |
| Ring, Retaining-Spiral, Internal Light Duty, CRES | AS 3217 |
| Rings for Shoulder - Light Series | GB /T 886 |
| Rings for Shoulder - Mediumn Series | GB /T 886 |
| Shaft Collar Axle Flande Mounting Shaft Collar | DIN 703 - 1955 |
| Adjusting Rings | DIN 705 - 2007 |
| Lock Rings at the End of Shaft with Bolt | GB 892 - 1986 |
© 2026 Ningbo Ruixi Metal Surface Technology Co., Ltd.. All rights reserved.