679 specifications across 34 categories
54 specifications
49 specifications
| Product | Standard |
|---|---|
| Hexagon Head Screws - Product Grade C(6 versions) | DIN 558 - 1987 |
| Hexagon Head Screws - Product Grades A and B(5 versions) | EN 24017 - 1991 |
| Hexagon Head Bolts with Fine Pitch Thread - Full Thread(3 versions) | GB /T 5786 - 2000 |
| Hexagon Head Bolts - Full Thread - Product Grade C(3 versions) | GB /T 5781 - 1986 |
30 specifications
| Product | Standard |
|---|---|
| Hexagon Head Bolt and Plain Washer Assemblies(5 versions) | GB 9074.14 - 1988 |
| Hexagon Head Screws and Spring Washer Assemblies(2 versions) | KS B 1040 - 1998 |
| Small Recessed Hex Head Bolts and Flat Washer Combination(2 versions) | JIS B 1187 |
| Hexagon Cap Screw and Spring Washer Assemblies(2 versions) | JIS B 1187 |
148 specifications
| Product | Standard |
|---|---|
| Hexagon Head Bolts - Product Grades A and B(9 versions) | NF E 25 |
| Hexagon Head Bolts(8 versions) | NF E 27 |
| Hexagon Head Bolts - Product Grade C(7 versions) | GB /T 5780 - 2000 |
| (4 versions) | JB /T 978 |
| Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter ≈ Pitch Diameter) |
29 specifications
| Product | Standard |
|---|---|
| Square Head Bolts - Product Grade C(2 versions) | GB /T 8 - 2021 |
| Small Square Head Bolts(2 versions) | GB /T 35 - 1988 |
| Square Head Screws - Product Grades A and B(2 versions) | NF E 25 |
| Blunt Bolts for General Purpose - Basic Parameters and Dimensions(2 versions) | GOST 21249 |
| Spuare Head Screws with B.S.Threads [Table 1] |
24 specifications
| Product | Standard |
|---|---|
| 12-Point Flange Head Screws (12.9 / ASTM F468M)(2 versions) | ASME B 18.2 |
| Spline Head Bolts, MJ Threads(2 versions) | HB 6900 - 1993 |
| High-strength Fillister Head Hub Bolts for Automotive Wheels | ZZB 1669 - 2020 |
| Metric 12-spline Flange Screws | ASME B 18.2 |
| 12-Point Head Heat Resistant Bolts |
12 specifications
| Product | Standard |
|---|---|
| Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B(6 versions) | NF E 25 |
| Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B(5 versions) | DIN 960 - 1990 |
| Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B(4 versions) | NF E 25 |
| Hexagon Head Bolts - Fine Pitch Thread - Product Grades A and B(2 versions) | GB /T 5785 - 2000 |
21 specifications
| Product | Standard |
|---|---|
| 114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)(2 versions) | ANSI B 18.5 |
| Flat Countersunk Head Square Neck Bolts with Long Square(2 versions) | DIN 605 - 2010 |
| Large Countersunk Square Neck Bolts [Table9](2 versions) | ANSI B 18.5 |
| Countersunk Head Square Neck Bolts(2 versions) | GB /T 10 - 2013 |
20 specifications
| Product | Standard |
|---|---|
| Cup Head Square Neck Bolts with Large Head(3 versions) | GB /T 14 - 1998 |
| Mushroom Head Square Neck Bolts(2 versions) | GB /T 14 - 2013 |
| Increased Cup Head Square Shoulder Bolts, Product Grade C | GOST 7802 - 1981 |
| Metric Round Head Square Neck Bolts with Large Head | ANSI B 18.5 |
| Mshroom Head Square Neck Bolts |
17 specifications
| Product | Standard |
|---|---|
| Flat Countersunk Head Nib Bolts(5 versions) | DIN 604 - 2017 |
| Flat Countersunk Nib Bolts(2 versions) | GB /T 11 - 1988 |
| Countersunk Head Nib Bolts(2 versions) | GB /T 11 - 2013 |
| Metric 90°Countersunk Head Nibbed Bolts | BS 4933 - 1973 |
| No.6 Repair Head Plow Bolts (Countersunk, Heavy Key) [Table 4] (A307, F468, F593, SAE J 429) |
16 specifications
| Product | Standard |
|---|---|
| Hexagon Bolts with Wire Holes On Head(3 versions) | GB /T 32.1 - 2020 |
| Hexagon Bolts with Wire Hole on Head(3 versions) | Q 170 |
| Hexagon Head Bolts with Hole(2 versions) | QJ 2365 - 1992 |
| Hexagon Bolts with Wire Hole on Head - Product Grade A and B | GB 32.1 - 1988 |
| Hexagon Bolts with Wire Holes on Head |
20 specifications
17 specifications
13 specifications
| Product | Standard |
|---|---|
| Cup Head Nib Bolts(4 versions) | GB /T 13 - 2013 |
| Cup Head Nib Bolts with Large Head(2 versions) | GB /T 15 - 1988 |
| Round Nib Head Bolts - ISO Metric Coarse Thread - Finish C | UNI 5730 - 1965 |
| ISO Metric Cup Nibbed Head Bolts | NZS 1390 - 1997 |
| Metric Cup Head Nibbed Bolts | BS 4933 - 1973 |
11 specifications
| Product | Standard |
|---|---|
| Hexagon Head Wood Screws(6 versions) | DIN 571 - 2016 |
| Square Head Wood Screws(2 versions) | NF E 25 |
| Square Lag Screws [Table 8] | ASME B 18.2 |
| Hex Lag Screws [Table 15] | ASME B 18.2 |
| Hex Lag Screws [Table 15] (ASTM A307 / F593 / F468 / A394) | ASME B 18.2 |
23 specifications
| Product | Standard |
|---|---|
| (16 versions) | TB /T 896 - 1999 |
| Eye Bolts(11 versions) | GB /T 798 - 2021 |
| Lifting Eye Bolts(4 versions) | DIN 580 - 2024 |
| Forged Steel Eyebolts Grade 4 for General Lifting Purposes(3 versions) | GB /T 27696 - 2011 |
| Type 1, Style A and B Plain Pattern (Straight Shank) Eyebolts [Table 1] (A489, F541, A473) |
14 specifications
| Product | Standard |
|---|---|
| Tapered Bolts(2 versions) | HB 1 |
| Countersunk Bolts and Slotted Countersunk Bolts [Table7] (A307, SAE J429, F468, F593)(2 versions) | ANSI B 18.5 |
| Hi-lock Bolts, 100° Head, Shear, Shank Tolerance f9 | GJB 134.3 - 1986 |
| Hi-lock Bolts, 100° Head, Shear, Shank Tolerance r6 | GJB 134.2 - 1986 |
| High-strength Structural Bolting Assemblies for Preloading - Part 7: System HR — Countersunk Head Bolt |
11 specifications
| Product | Standard |
|---|---|
| Rail Joint Bolts(3 versions) | GOST 11530 - 2014 |
| Fish Bolts - Part 1: with Round Head and Oval Neck(2 versions) | DIN 5903 |
| Oval Neck Track Bolts [Table 1] (A449, A354) | ASME B 18.10 - 2006 |
| High Strength Joint Bolt for Railway - 10.9 Grade | GB 5098 - 1985 |
| High Strength Joint Bolt for Railway - 8.8 Grade |
10 specifications
| Product | Standard |
|---|---|
| Cup Head Square Neck Bolts(3 versions) | GB /T 12 - 2013 |
| Strengthened Cap Head Square Neck Bolts(2 versions) | GB /T 794 - 1993 |
| Round Head Square Neck Bolts, (Inch Series) [Table2] (A307, SAE J429, F468, F593)(2 versions) | ANSI B 18.5 |
| Round Head Square Neck Bolts,(Inch Series) | ANSI B 18.5 |
| Semi-round Head Square Neck Bolts |
12 specifications
| Product | Standard |
|---|---|
| Round Head Ribbed Neck Bolts,(Inch Series) [Table 4] (A307, SAE J429, F468, F593)(2 versions) | ANSI B 18.5 |
| Round Head Bolts, (Inch Series) [Table 1] (A307, SAE J429, F468, F593) | ASME B 18.5 |
| Round Head Bolts, (Inch Series) [Table1] (A307, SAE J429, F468, F593) | ANSI B 18.5 |
| Metric Cup Head Bolts | BS 4933 - 1973 |
| Metric Round Head Ribbed Neck Bolts |
12 specifications
10 specifications
| Product | Standard |
|---|---|
| Lobed Head Screws [Table 9](2 versions) | ASME B 18.2 |
| Steel Hexalobular Head Bolts with Small Flange(2 versions) | DIN 34800 - 2005 |
| Hexalobular Bolts with Flange | GB /T 35481 - 2017 |
| Steel Hexalobular Head Bolts with Large Flange | DIN 34801 - 1999 |
| Hexalobular Bolts with Flange for Automobile |
8 specifications
| Product | Standard |
|---|---|
| Cup Head Square Neck Bolts with Small Head and Short Neck - Product Grade B(3 versions) | GB /T 801 - 2021 |
| Round Head Short Square Neck Bolts,(Inch Series) [Table3] (A307, SAE J429, F468, F593)(2 versions) | ANSI B 18.5 |
| Metric Round Head Short Square Neck Bolts | ANSI B 18.5 |
| Metric Round Head Square Neck Bolts | ANSI B 18.5 |
| Round Head Short Square Neck Bolts |
10 specifications
| Product | Standard |
|---|---|
| Hexagon Bolts with Recess(2 versions) | HB 8035 - 2002 |
| Hexagon Bolts with Slot on Head | GB /T 29.1 - 2013 |
| Hexagon Bolts with Slot on Head - Product A and B | GB /T 29.1 - 1988 |
| Slotted Hexagon Head Bolts with Reduced Body | CNS 4702 - 1982 |
| Plain (Unslotted) and Slotted Regular and Large Hex Head Screws (ASTM F837,F468) [T2.2.9-1] |
40 specifications
| Product | Standard |
|---|---|
| Hexagon Flange Bolts(6 versions) | IFI 111 - 2002 |
| Hexagon Bolts with Flange - Small Series(3 versions) | NF E 25 |
| Hexagon Flange Bolts - Small Series(2 versions) | IS 15582 - 2005 |
| Metric Hex Flange Screws(2 versions) | ASME B 18.2 |
| Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B |
11 specifications
8 specifications
4 specifications
| Product | Standard |
|---|---|
| Hexagon Head Thread Rolling Screws, Grade A and B(3 versions) | DIN 7500 |
| Hexagon Head Thread Forming Screws(3 versions) | GB /T 6563 - 1986 |
| Hexagon Head Thread Rolling Screws | GB /T 6563 - 2014 |
| Cross Recessed Hexagon Triangular Tooth Lock Screw with Flange | YJT 4020 |
7 specifications
| Product | Standard |
|---|---|
| Hexagon Fit Bolts with Split Pin Hole on Shank | GB 28 - 1976 |
| Hollow Screws | GB 3750.3 - 1983 |
| Hexagon Fit Bolts - Product Grade A and B | GB /T 27 - 1988 |
| Hexagon Fit Bolts with Split Pin Hole on Shank - Product Grade A and B | GB 28 - 1988 |
| Small Hexagon Fit Bolts | GB 27 - 1976 |
7 specifications
5 specifications
3 specifications
| Product | Standard |
|---|---|
| No.4 Repair Plow Countersunk Square Bolt [Table 3] (A307, F468, F593, SAE J 429) | ASME B 18.9 - 2012 |
| Regular Head Plow Bolts（Square Head, Countersunk) | ANSI B 18.9 - 2007 |
| Repair Head Plow Bolts (Squre Head, Countersunk) | ANSI B 18.9 - 2007 |
2 specifications
1 specifications
| ISO Metric Hexagon Head Screws - Product Grade C(2 versions) | AS 1111.2 - 2000 |
| Plastic Hexagon Head Screws(2 versions) | DIN 34810 - 1999 |
| Hexagon Head Screws - Product Grade A and B(2 versions) | ISO 4017 - 1999 |
| Hexagon Bolts with Thread Approximately to Head, Regular | CNS 4322 - 1982 |
| Hexagon Bolts with Thread up to Head, Finished and Semi-Finished | CNS 3122 - 2001 |
| Hexagon Head Bolts-Full Thread - Grade B [Table 6] | KS B 1002 |
| Hexagon Head Bolts - Product Grades A and B | NF E 25 |
| Hexagon Head Bolts with Thread To Head in Titanium Alloys | QJ 2581 |
| Hexagon Head Bolts with Thread to Head in Titanium Alloys | QJ 2581 - 1993 |
| Hexagon Head Screws - Full Thread - Product Grade C | NF E 25 |
| Hexagon Head Screws Threaded Up To The Head - Product Grades A and B | DIN 933 - 1987 |
| Hexagon Screws for Manufacture of Railway and Tramway Rolling Stock - ISO Metric Coarse Thread - Finish A | UNI 6421 - 1969 |
| Iso Metric Hexagon Head Screws Faced Under Head Only [Table 6] | BS 4190 |
| ISO Metric Indented Hexagon Head Screws [Table 6] | NZS 1427 - 1996 |
| Precision Hexagon Head Screws - Washer Faced - B.S.W. & B.S.F. Threads | BS 1083 - 1965 |
| Screws with British Standard Whitworth Threads (rationalized series) | NZS 2451 - 1998 |
| Unified Hexagon Head Screws - Heavy Series | BS 1769 - 1951 |
| Unified Hexagon Head Screws, Washer Faced | BS 1768 - 1963 |
| Hexagon Head Bolts - Full Thread | GB /T 5783 - 2016 |
| Hexagon Head Bolts - Full Thread - Grade A and B | GB /T 5783 - 2000 |
| Hexagon Head Bolts | UNI 5739 - 1965 |
| Hexagon Head Bolts - Full Thread - Product Grade A and B | GB 5783 - 1986 |
| Hexagon Head Screw Bolt, Coarse, Product Grade C | JIS B 1180 |
| Hexagon Head Screw Bolt, Coarse, Product Grades A and B | JIS B 1180 |
| Hexagon Head Screws Product Grades A and B | EN 24017 - 1992 |
| Hexagon Head Screws (Size Range M1.6 - M64) | IS 1364 |
| Hexagon Head Screws with Threading Up To Head, Product Grades A and B | GOST R 50793 - 1995 |
| ISO Metric Black Hexagon Head Screws [Table 5] | BS 4190 |
| ISO Metric Hexagon Head Screws Faced Under Head Only [Table 11] | BS 4190 |
| Hexagon Head Bolts, Continuous Thread, Product Grade C [Table 8] | JIS B 1180 |
| Hexagon Head Bolts, Continuous Thread, Procuct Grade A [Table 5] | JIS B 1180 |
| Hexagon Head Bolts, Continuous Thread, Product Grade B [Table 6] | JIS B 1180 |
| Hexagon Head Bolts-Full Thread - Grade A [Table 5] | KS B 1002 |
| Hexagon Head Bolts-Full Thread - Grade C [Table 7] | KS B 1002 |
| Hexagon Head Bolts - Full Thread - Product GradeC | GB /T 5781 - 2000 |
| Hexagon Head Screw Bolt, Fine Thread, Product Grade A and B | JIS B 1180 |
| Hexagon Head Screws | BS 1981 - 1991 |
| Hexagon Head Screws-Product Grade C | ISO 4018 - 1999 |
| Hexagon Head Screws (Size Range M5 to M64), Product Grade C | IS 1363 |
| Hexagon Head Screws with B.S.Threads [Table 1] | BS 916 - 1953 |
| Hexagon Head Screws with Full Thread - Product Grade A and B | ISO 4017 - 2011 |
| Hexagon Screws Faced Under Head with B.S.Threads - Black [Table 2] | BS 916 - 1953 |
| Hexagon Screws (UNC and UNF threads) | NZS 2465 - 1999 |
| ISO Metric Black Hexagon Head Screws [Table 10] | BS 4190 |
| ISO Metric Hexagon Head Screws - Product Grades A and B | AS 1110.2 - 2000 |
| Hexagon Head Bolt and Serrated Lock Washer External Teeth Assemblies(2 versions) |
| GB 9074.16 - 1988 |
| Small Hexagon Head Bolt and Flat Washer Assemblies(2 versions) | JIS B 1187 |
| Small Hexagon Cap Screw and Spring Washer Assemblies(2 versions) | JIS B 1187 |
| Hexagon Head Bolts and Washer Assemblies with Plain Washers(2 versions) | GB /T 9074.1 |
| Hexagon Head Bolt, Single Coil Spring Lock Washer and Plain Washer Assemblies | GB /T 9074.17 - 1988 |
| Hexagon Head Bolts and Plain Washers Assemblies | DIN 6900 |
| Hexagon Head Bolts and Single Coil Spring Lock Washer Assemblies | GB 9074.15 - 1988 |
| Screw and Washer Assemblies Made of Steel with Plain Washers – Washer Hardness Classes 200 HV and 300 HV | ISO 10644 - 1998 |
| Hexagon Head Bolts (Full Thread) And Washer Assemblies with Plain Washers | GB /T 9074.1 |
| Hexagon Head Bolts with Conical Spring Washers | Q 141 |
| Hexagon Head Tapping Screws and Plain Washer Assemblies | JIS B 1130 - 2006 |
| Rolling Bearing - Locking Clips - MS Series | GB /T 9160.2 |
| Small Hexagon Head Bolt and Serrated Lock Washer External Teeth Assemblies | JIS B 1187 |
| Hexagon Head Bolt and External Teeth Serrated Lock Washer Assemblies | Q 144 |
| Hexagon Head Bolts (Full Thread) and Washer Assemblies with Plain Washers | ISO 10644 |
| High Strength Bolts with Large Hexagon Head Assemblies for Steel Structures | GB /T 1231 |
| Hexagon Cap Screw and Spring Washer Assemblies - SEMS | ANSI B 18.13 - 1996 |
| Combination of Hexagon Head Bolts and Tapered Spring Washers | QC /T 600 - 1999 |
| Cross Recessed Hexagon Bolt with Indentation and Plain Washer Assemblies | GB 9074.11 - 1988 |
| Cross Recessed Hexagon Bolt with Indentation and Single Coil Spring Lock Washer Assemblies | GB 9074.12 - 1988 |
| Cross Recessed Hexagon Bolt with Indentation, Single Coil Lock Washer and Plain Washer Assemblies | GB 9074.13 - 1988 |
| Cross Recessed Pan Screw Assemblies with Washers | JIS B 1130 - 2012 |
| Metric Hexagon Cap Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter) | ANSI B 18.13 |
| Hex Head Screw and Helical Spring Lock Washers for SEMS | ASME B 18.13 - 2017 |
| Hex Screw and Spring Washer Assemblies | Q 142 |
| Hexagon Bolts and Spring Washers、Plain Washers Assemblies | Q 146 |
| EN 24015 - 1991 |
| Hexagon Head Bolts Grades A and B Partially Threaded(2 versions) | DIN 931 |
| Plain Hexagon Head Screws(2 versions) | BS 1981 - 1991 |
| Hexagon Head Bolts in Titanium Alloys(2 versions) | QJ 2580 |
| Hexagon Bolts with Split Pin Hole on Shank(2 versions) | GB /T 31.1 - 2013 |
| Hexagon Bolts for Flange Pipe(2 versions) | HG /T 20634 - 2009 |
| Hexagon Head Bolls: Product Grade C(2 versions) | EN 24016 - 1991 |
| Hexagon Bolts with Split Pin Hole on Shank-Fine Pitch Thread(2 versions) | Q 173 |
| Hex Cap Screws [Table 4](2 versions) | ASME B 18.2 |
| Hexagon Head Bolts - Fine Thread(2 versions) | Q 151 |
| Metric Precision Hexagon Bolts(2 versions) | BS 3692 - 2001 |
| MJ Thread, Hexagon Head Bolts | GJB 3374 |
| Hexagon Bolts for Steel Pipe Flange | HG /T 20634 - 1997 |
| Hexagon Bolts, Reduced Shank (Shank Diameter ≈ Pitch Diameter), Product Grade B | EN 24015 - 1991 |
| Hexagon Bolts, Split Pin Hole | GJB 3372 |
| Hexagon Bolts with Split Pin Hole On Shank-Reduced Shank-Product Grade B | GB /T 31.2 - 1988 |
| Hexagon Cap Screw, Partially Threaded Shank, ISO Metric Coarse Thread Pitch - Product Grade A | UNI 5737 - 1977 |
| Hexagon Domed Cap Bolts | CNS 4701 - 1982 |
| Reduced Shanke Bolts and Screws with Coarse Thread - Hexagon Head (DIN 931) | DIN 7964 |
| Reduced Shanke Bolts and Screws with Coarse Thread - Hexagon Head (ISO 4014) | DIN 7964 |
| Hexagon Head Bolt with B.S.Threads [Table 1] | BS 916 - 1953 |
| Hexagon Head Bolts - Finished and Semi-Finished | CNS 3121 - 1998 |
| Hexagon Head Bolts, Finished [Annex Attached Table 1.1] | JIS B 1180 |
| Hexagon Head Bolts - Grade A and B | GB /T 5782 - 2016 |
| Hexagon Head Bolts - Grade C [Table 3] | KS B 1002 |
| Hexagon Head Bolts - Part 2: Metric Thread M 68 to M 160 x 6 - Product Grade B | DIN 931 |
| Hexagon Head Bolts - Product Grade A and B | GB /T 5782 - 2025 |
| Hexagon Head Bolts, Product Grade A [Table 3] | JIS B 1180 |
| Hexagon Head Bolts - Product Grade B | ZQ 4323 - 2006 |
| Hexagon Head Bolts, Product Grade B [Table 4] | JIS B 1180 |
| Hexagon Head Bolts, Product Grade C [Table 7] | JIS B 1180 |
| Hexagon Head Bolts, Regular [Annex Attached Table 1.3] | JIS B 1180 |
| Hexagon Head Bolts, Regular, Metric Thread | CNS 3123 - 1987 |
| Hexagon Head Screws in Titanium Alloy | HB 8023 - 2002 |
| Hexagon Head Bolts, Short Thread, Shank Tolerance f9, MJ Thread | GJB 3374 |
| Hexagon Head Bolts with Split Pin Hole on Shank - Reduced Shank - Product Grade B | GB /T 31.2 - 2025 |
| Hexagon Head Machine Screws with B.S.W. & B.S.F. Threads [Table 9] | BS 450 - 1958 |
| Small Hexagon Head Bolts, Short Thread, Shank Tolerance h8 | GJB 3371 |
| Hexagon Head Screws | HB 1 |
| Small Hexagon Head Bolts, Short Thread, Shank Tolerance h8, MJ Thread | GJB 3374 |
| Hexagon Head Screws - Product Grade C | GOST 50794 - 1995 |
| Hexagon Reduced Head Bolts Product Grade B, Type 2 | GOST 7796 |
| Hexagon Reduced Head Bolts Product Grade B, Type 5 | GOST 7796 |
| Hexagon Screws for Manufacture of Railway and Tramway Rolling Stock - ISO Metric Coarse Thread - Finish A | UNI 6420 - 1969 |
| High-strength Bolts of Product Grade B | GOST 2235 - 1977 |
| Iso Metric Black Hexagon Head Bolts [Table 5] | BS 4190 |
| ISO Metric Hexagon Head Bolts - Faced Under Head or Faced Under Head and Turned on Shank [Table 11] | BS 4190 |
| Metric Hex Cap Screws | ANSI B 18.2 |
| Petrochemical Hexagon Head Bolts | SH /T 3404 |
| Metric Hex Head Bolts (SAE J1199, ASTM F568) | ANSI B 18.2 |
| Metric Hex Head Machine Screws | IFI 513 - 1982 |
| Metric Hex Transmission Tower Bolts | IFI 541 - 1982 |
| Precision Hexagon Head Bolts - Washer Faced - B.S.W. & B.S.F. Threads | BS 1083 - 1965 |
| Reduced Shank Bolts and Screws with Coarse Thread | DIN 7964 - 1990 |
| Small Hexagon Bolts with Short M Thread | GJB 3371 |
| Small Hexagon Head Bolts, Shank Tolerance f7 | GJB 3371 |
| Small Hexagon Head Bolts, Shank Tolerance h6 | GJB 3371 |
| Small Hexagon Head Bolts, Short Thread, Shank Tolerance r6 | GJB 3371 |
| Small Hexagon Head Bolts with Clevis End, Short Thread, Shank Tolerance f7, MJ Thread | GJB 3374 |
| Unified Hexagon Head Bolts, Washer Faced | BS 1768 - 1963 |
| Hexagon Head Bolt and Hexagon Nut for Shackles, Forms BB and SB | JIS B 2801 - 1996 |
| Hexagon Head Bolts - Grade C | NF E 25 |
| Bolts with Britishstandard Whitworth Threads (Rationalized Series) | NZS 2451 - 1998 |
| Hexagon Head Bolts - Product Grade B - Reduced Shank | NF E 25 |
| Hexagon Head Bolts - Reduced Shank(Shank Diameter≈Pitch Diameter) - Product Grade B | ISO 4015 - 2022 |
| Hexagon Head Bolts with Split Pin Hole on Shank - Fine Pitch Thread | GB /T 31.3 - 2025 |
| Hexagon Head Bolts with Split Pin Hole on Shank for Electric Power Fittings | DL /T 764 - 2014 |
| Hexagon Bolts, Close Tolerance, with Short-length MJ Thread, Corrosion-resisting Steel - Nominal Tensile Strength 1100 MPa, For Temperatures Up To 425℃ | DIN 65339 - 2021 |
| Hexagon Bolts Faced Under Head, and Faced Under Head and Turned on Shank with B.S.Threads - Black [Table 2] | BS 916 - 1953 |
| Aerospace Series - Bolts, Hexagon Head, Relieved Shank,Long Thread, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at Ambient Temperature)/650°C | EN 3009 - 1998 |
| Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ | EN 3006 - 1994 |
| Aerospace series - Screws, Hexagon Head, Threaded to Head, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650 °C | EN 2938 - 1995 |
| Unified Hexagon Head Faced Bolts | BS 1769 - 1951 |
| Upset Type Hexagonal Head Bolts | GOST 7798 |
| Bolts, Small Hexagon Head with Hole Through The Shank | GB 23 - 1976 |
| Electric Power Fitting Fasteners Hexagon Head Bolts with Split Pin Hole on Shank | DL /T 764.1 - 2001 |
| Heavy Hex Bolts [Table 3] | ASME B 18.2 |
| Hex Cap Screws [Table 6] SAE J429, ASTM A449, F593, F468 | ASME B 18.2 |
| Hexagon Bolt, Coarse Thread, Product Grade A and B | HG /T 20613 |
| Hexagon Bolts (UNC and UNF threads) | NZS 2465 - 1999 |
| Hexagon Head Transmission Tower Bolts | IS 12427 - 2001 |
| Hexagon Bolts with Split Pin Hole on Shank-Fine Pitch Thread-Product Grade A and B | GB 31.3 - 1988 |
| Hexagon Head Bolt - Coarse Thread - Product Grades A and B | JIS B 1180 |
| Hexagon Head Bolts - Finished (Attached Table 1.1) | JIS B 1180 |
| Hexagon Head Bolts - Grade B [Table 2] | KS B 1002 |
| Hexagon Head Bolts, Metric Thread M42 to M160×6, Product Grade B | DIN 931 |
| Hexagon Head Bolts-Product Grade C | ISO 4016 - 2011 |
| Hexagon Head Bolts (Semi-finished) [Annex 1 Attached Table 1.2] | JIS B 1180 |
| Hexagon Head Bolts, Short Thread, Shank Tolerance r6 | GJB 3371 |
| Hexagon Head Bolts (Size Range M5 to M64), Product Grade C | IS 1363 |
| Hexagon Head Screws with Waisted Shank | DIN 7964 - 1977 |
| Hexagon Head Bolts with Indentation-Reduced Shank [Table 4] | KS B 1002 |
| Hexagon Head Bolts，Shank Tolerance f9, MJ Thread | GJB 3374 |
| Hexagon Screws with Waisted Shank | GB 838 - 1988 |
| Hot-Dip Galvanized Bolts for Tower and Hardware of Transimission Lines | DL /T 284 - 2012 |
| Indented Hexagon Head Screws, Product Grade A, Type 4 | GOST 7805 |
| ISO Metric Hot-dip Galvanized Hexagon Bolts for Tower Construction | NZS 1559 - 1997 |
| Small Hexagon Head Bolts, Short Thread, Shank Tolerance f9, MJ Thread | GJB 3374 |
| Small Hexagon Head Bolts with Clevis End, Short Thread, Shank Tolerance h6, MJ Thread | GJB 3374 |
| Electric Traction; Screws with Cup Point for Overhead Fittings | DIN 43165 - 1985 |
| Hex Bolts [Table 2] ASTM A307, A354 | ASME B 18.2 |
| Hex Bolts [Table 2] (ASTM A307 / A354 / A394) | ASME B 18.2 |
| Hex Cap Screws [Table 6] (SAE J429 / ASTM A449 / F593 / F468 / A394) | ASME B 18.2 |
| Hex Head Prestressed Bolts | ZQ 4322 - 2006 |
| Hexagon Bolts of Accuracy Class B | GOST 7798 |
| Hexagon Bolts, Product Grade A, Type 1 | GOST 7805 |
| Hexagon Bolts, Split Pin Hole, Product Grade A, Type 2 | GOST 7805 |
| Hexagon Bolts with M Thread | GJB 3371 |
| Hexagon Bolts with Split Pin Hole on Shank A and B | GB /T 31.1 - 1988 |
| Hexagon Head Bolt - Coarse Thread - Product Grade C | JIS B 1180 |
| Hexagon Head Bolt, Fine Thread, Product Grade A and B | JIS B 1180 |
| Hexagon Head Bolt, Pitch Diameter, Coarse Thread, Product Grade B | JIS B 1180 |
| Hexagon Head Bolts - Grade A [Table 1] | KS B 1002 |
| Hexagon Head Bolts - Product Grade B-Reduced Shank (Shank Diameter ≈ Pitch Diameter) | GOST R 50791 - 1995 |
| Hexagon Head Bolts, Product Grade C [Table 2] | JIS B 1180 |
| Hexagon Head Bolts - Reduced Shank - Product Grade B | GB 5784 - 1986 |
| Hexagon Head Bolts, Semifinished [Annex Attached Table 1.2] | JIS B 1180 |
| Hexagon Head Bolts, Short Thread, Shank Tolerance r6, MJ Thread | GJB 3374 |
| Hexagon Head Bolts (Size Rage M1.6 to M64), Product Grade A and B | IS 1364 |
| Hexagon Head Bolts, Short Thread, Shank Tolerance f9 | GJB 3371 |
| Hexagon Head Bolts [Table 2] | ASME B 18.2 |
| Hexagon Head Bolts，Shank Tolerance f9 | GJB 3371 |
| Hexagon Head with Hole Through The Shank | Q 173 |
| Hexagon Reduced Head Bolts Product Grade B, Type 4 | GOST 7796 |
| Hexagon Reduced Head Bolts Product Grade B, Type 1 | GOST 7796 |
| Iso Metric Black Hexagon Head Bolts [Table 10] | BS 4190 |
| ISO Metric Hexagon Head Bolts - Faced Under Head or Faced Under Head and Turned on Shank [Table 6] | BS 4190 |
| Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ | EN 3007 - 1996 |
| ISO Metric Hexagon Head Bolts - Product Grade C | AS 1111.1 - 2000 |
| ISO Metric Hexagon Head Bolts - Product Grades A and B | AS 1110.1 - 2000 |
| Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ | EN 3006 - 1994 |
| Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ | EN 3007 - 1996 |
| Aerospace Series - Hexagon Bolts, Close Tolerance, with Short-length MJ Thread, Titanium Alloy, Nominal Tensile Strength 1100 Mpa, for Temperatures up to 315℃ | DIN 65526 - 2016 |
| Bolt, Hexagonal Head, for Tensile Application, ISO Thread-4g Class | NF L 22 |
| Bolts, Small Hexagon Head with Fit Neck and Hole Through The Shank | GB 24 - 1976 |
| M5 to M52 Hexagon Head Bolts - Product Grade C | DIN 601 - 1987 |
| Metric Heavy Hex Screws (F568M, F738M, F468M) | ANSI B 18.2 |
| Effective Diameter Hexagon Head Bolts, Porduct Grade B, [Table 9] | JIS B 1180 |
| Metric Hexagon Head Screws | ANSI B 18.6 |
| Metric Hex Bolts (SAE J1199, ASTM F568) | — |
| Heavy Hex Screws [Table 5] | ANSI B 18.2 |
| Heavy Hex Screws [Table 6] | ASME B 18.2 |
| Metric Hex Head Screws with Depression | ASME B 18.2 |
| BS 916 - 1953 |
| Square Bolts [Table 1] | ANSI B 18.2 |
| Square Head Bolts (Finished) | CNS 3134 - 1981 |
| Square Head Bolts for Shaft Guides | DIN 21346 - 1989 |
| Square Head Bolts (Semi-Finished) | CNS 3135 - 1981 |
| Square Head Bolts [Table 1] | ASME B 18.2 |
| Square Head Bolts [Table 1-3] | JIS B 1182 |
| Square Head Bolts with Small Head | GB /T 35 - 2013 |
| Large Square Head Bolts [Table 2] | JIS B 1182 |
| Square Bolts Faced Under Head, and Faced Under Head and Turned on Shank with B.S.Threads - Black [Table 2] | BS 916 - 1953 |
| Square Head Bolts for Wooden Guide Plates | CNS 4699 - 1982 |
| Square Head Bolts - Product Grade C (Black) | GB 8 - 1976 |
| Square Head Bolts [Table 1-2] | JIS B 1182 |
| Square Head screws - Product grade C | NF E 25 |
| Square Head Screws Faced Under Head with B.S.Threads - Black [Table 2] | BS 916 - 1953 |
| Askew Head Bolts [Table 4] | ASME B 18.2 |
| Thin Square Head Bolts [Table 1-1] | JIS B 1182 |
| Metric Square Head Bolts | ASME B 18.2 |
| Square Head Bolt with B.S.Threads [Table 1] | BS 916 - 1953 |
| Square Head Bolts (Regular) | CNS 3136 - 1981 |
| Square Head Bolts [Table 1] (ASTM A307 / A354 / A394) | ASME B 18.2 |
| Askew Head Bolts [Table 4] (ASTM A307 / A354 / A394) | ASME B 18.2 |
| Large Square Head Bolts (Regular) | CNS 3137 - 1981 |
| Large Square Head Bolts and Bolts with Square Nut - Metric Coarse Thread - Finish C | UNI 5729 - 1965 |
| Fish Plate Bolt Square Head | JIS E 1107 - 2008 |
| QC /T 1104 - 2019 |
| Aerospace; Bihexagonal Head Bolts, Close Tolerance, with Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, for Temperatures up to 315 °c | DIN 65438 - 1993 |
| Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa | ISO 9255 - 2008 |
| Wheel Bolts - Type D, E | DIN 74361 |
| Bihexagonal Head Bolts with Flange | SAE J 58 - 1998 |
| 12-spline Flange Bolts | JB /T 6686 - 1993 |
| Aerospace - Bolts, Normal Spline Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa | ISO 9254 - 1993 |
| Flange 12-Point Screws | IFI 115 - 2002 |
| Metric 12-Spline Flange Screws | ASME B 18.2 |
| (R) Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, CRES, UNS N07718, 185 KSI Min, .1900-32 UNJF-3A | AS 3236 |
| Aerospace - Bolts, Large Bihexagonal Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes 1250 Mpa to 1800 Mpa | ISO 3186 - 2008 |
| Center Rid 3rd Class Bolts of Automobiles | JASO C 610 |
| Aerospace Series - Bolts, Double Hexagon Head, Close Tolerance, Medium Thread Length, in Heat Resisting Nickel Base Alloy NIP100HT (lnconel 718), Uncoated - Classification: 1275 MPa/650 | EN 3327 - 2008 |
| Ball Collar Screw - Type G | DIN 74361 |
| Bolt, Bihexagonal Head - ISO Thread, 4h class | NF L 22 |
| Bolt, Machine-Double Hex Extended Washed Head, Drilled, PD Shank, MS 5662, 0.1900-32 UNJF-3A | AS 3243 - 1980 |
| Bolt, Machine-double Hexagon Extended Washer Head. Corrosion and Heat Resistant Steel. UNS S66286 130 KSI Min. 1900-32 UNJF-3A | AS 9556 |
| Center Rib 1st Class Bolts of Automobiles | JASO C 610 |
| Center Rid 2nd Class Bolts of Automobiles | JASO C 610 |
| Hexagon Bolts with Thread Approximately to Head, Finished and Semi-finished, Fine Thread | CNS 4321 - 1987 |
| Hexagon Head Bolts - Fine Pitch Thread - Product Grade A and B | GB 5785 - 1986 |
| Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Fine Pitch Thread - Full Thread | JG /T 5057.6 - 1995 |
| Hexagon Head Bolts, Finished and Semi-finished, Fine Thread | CNS 4320 - 1987 |
| Hexagon Head Screws, with Fine Pitch Thread - Product Grades A and B | ISO 8676 - 2022 |
| Hexagon Head Screws with Metric Fine Pitch Thread - Full Threaded, Product Grades A and B | GOST R 50795 - 1995 |
| Bolt Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 KSI Min, 1900-32 UNJF-3A | AS 9283 |
| Hexagon Bolts, Fine Thread, Product Grade A and B | HG /T 20613 |
| No.3 Regular Head Plow Bolts (Round, Countersunk, Square Neck) (A307, F468, F593, SAE J 429) | ASME B 18.9 - 2012 |
| No.3 Repair Head Plow Bolts (Round, Countersunk, Square Neck) (A307, F468, F593, SAE J 429) | ASME B 18.9 - 2012 |
| Metric 90°Countersunk Square Bolts | BS 4933 - 1973 |
| Plow Bolts (Round, Countersunk, Square Neck) | ANSI B 18.9 - 2007 |
| Countersunk Square Bolts with Long Square | CNS 4418 - 1981 |
| Black Counersunk Square Neck Bolts for Woodwork | BS 325 - 1947 |
| Metric 120°Countersunk Head Square Neck Bolts | BS 4933 - 1973 |
| Earth-Moving Machinery - Plough Bolt | GB /T 21934 - 2008 |
| Flat Countersunk Head Elevator Bolts [Table9] | ASME B 18.5 |
| Flat Countersunk Head Square Neck Bolts with Short Square | DIN 608 - 2010 |
| 114° Countersunk Square Neck Bolts | ANSI B 18.5 - 2008 |
| Black Countersunk Square Neck Bolts for Iron | BS 325 - 1947 |
| Countersunk Square Bolts with Square Short Square | CNS 4419 - 1981 |
| Flat Countersunk Head Elevator Bolts | ANSI B 18.5 - 2008 |
| Flat Countersunk Square Neck Bolts | GB /T 10 - 1988 |
| Flat Countersunk Square Neck Bolts - Grade C | UNI 6104 - 1975 |
| Flat Countersunk Square Neck Bolts with Short Square | DIN 608 - 1981 |
| DIN 603 - 1981 |
| Round Head Square Neck Bolts - JAPY Type | NF E 27 |
| Step Bolts | ANSI B 18.5 - 2008 |
| Step Bolts,(Inch Series) | ASME B 18.5 |
| Step Bolts, (Inch Series) | ANSI B 18.5 |
| Agricultural Machinery - Flat Countersunk Square Neck Bolts with Short Square | DIN 11015 - 1995 |
| Cup Head Square Bolts with Large Head - Grade C | GB /T 14 - 1988 |
| Cup Head Square Neck Bolts with Large Head - Product Grade C | ISO 8677 - 1986 |
| Cup Square Bolts with Hexagon Nut - ISO Metric Coarse Thread - Finish C | UNI 5732 - 1965 |
| Metric Cup Square Bolts | BS 4933 - 1973 |
| Cover Bolts Type A | CNS 4574 - 1981 |
| Cup Head Square Neck Bolts | DIN 603 - 2017 |
| Cup Head Square Neck Bolts（Large Size）[Table 1] | JIS B 1171 |
| Cup Square Bolts and Bolts with Square Nut - ISO Metric Coarse Thread - Finish C | UNI 5731 - 1965 |
| Cup Square Bolts, Metric Thread Regular | CNS 4424 - 1981 |
| Cup Square Bolts with Enlarged Head for Looms | CNS 4425 - 1981 |
| ASME B 18.9 - 2012 |
| Railway Vehicles - Countersunk Bolts with Double Nip with Metric ISO Thread - Class C | DIN 25195 - 2003 |
| Countersunk Head Double Nib Bolts | GB /T 800 - 2020 |
| No.7 Head Plow Bolts (Round, Countersunk, Reverse Key) [Table 2] (A307, F468, F593, SAE J 429) | ASME B 18.9 - 2012 |
| Countersunk Head Nip Bolts | CNS 4417 - 1981 |
| Flat Countersunk Nib Bolts [Table 2] | JIS B 1179 |
| Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish | DIN 11014 - 1968 |
| Black Countersunk Nibbed Bolts | BS 325 - 1947 |
| Countersunk Head Bolts with Double Nibs | GB /T 800 - 1988 |
| Countersunk Bolts with Double Nips | CNS 4697 - 1982 |
| Countersunk Double-Rib Bolts | CNS 4698 - 1982 |
| Cylindrical Counter Sunk Screws | DIN 792 - 1976 |
| Flat Countersunk Head Nib Bolts - Grade C | UNI 6105 - 1967 |
| GOST 7798 |
| Hexagon Bolts with Wire Holes On Head - Fine Pitch Thread | GB /T 32.3 - 2020 |
| Hexagon Bolts with Wire Holes on Head - Fine Pitch Thread - Product Grade A and B | GB 32.3 - 1988 |
| Hexagon Bolts with Wire Holes on Head - Full Thread | WJ 2215 - 1994 |
| Screw, Cap, Hex Head, Fully Threaded, Metric | NAM 51474 |
| Hexagon Head Bolts with Split Pin Hole on Head - Reduced Shank - Product Grade B | GB /T 32.2 - 2025 |
| Bolts, Small Hexagon Head With Holes Through The Head | GB 25 - 1976 |
| Aerospace Series - Bolts, Normal Hexagonal Head, Threaded to Head, In Corrosion Resisting Steel, Passivated - Classification: 600 Mpa (At Ambient Temperature) / 425 ℃ | EN 2887 - 1995 |
| Bolts, Small Hexagon Head with Fit Neck and Holes Through The Head | GB 26 - 1976 |
| Hexagon Bolts with Wire Holes on Head - Reduced Shank - Product Grade B | GB /T 32.2 - 1988 |
| Hexagon Reduced Head Bolts Product Grade B, Type 3 | GOST 7796 |
| Hexagon Bolts with Wire Holes on Head, Product Grade A, Type 3 | GOST 7805 |
| CNS 3120 - 1987 |
| Small Hexagon Bead Bolt, Semi-Finished | JIS B 1180 |
| Small Hexagon Head Bolts, Finished | JIS B 1180 |
| Small Hexagon Head Bolts, Semifinished [Annex Attached Table 2.2.] | JIS B 1180 |
| Small Hexagon Head Bolts, Finished [Annex Attached Table 2.1] | JIS B 1180 |
| Hexagon Reduced Head Bolts with Guide Neck Product Grade A, Type 3 | GOST 7811 |
| Hexagon Reduced Head Bolts with Guide Neck Product Grade A, Type 1 | GOST 7811 |
| Hexagon Reduced Head Bolts with Guide Neck Product Grade A, Type 2 | GOST 7811 |
| Product Grade A Fit Bolts with Hexagon Reduced Head | GOST 7817 - 1980 |
| Small Hexagon Head Bolts with Thread Approximately To Head, Small Widths Across Flats | CNS 4700 - 1987 |
| Hexagon Reduced Head Bolts with Guide Neck Product Grade A, Type 4 | GOST 7811 |
| Reduced Hexagon - Head Bolts, Short Thread, Shank Tolerance h8 | HB 1 |
| Small Hexagon Head Bolts | GB 21 - 1976 |
| Bolts, Small Hexagon Head with Fit Neck | GB 22 - 1976 |
| Hexagon Reduced Head Bolts with Guide Neck Product Grade A, Type 5 | GOST 7811 |
| Hexagon Bolts with Reduced Head and Guide Neck, Precision Class B, Type 5 | GOST 7795 |
| Hexagon Flange Bolts - Fine Pitch Thread - Small Series | NF E 25 |
| Hexagon Flange Bolts - Fine Pitch Thread - Small Series - Type N | GB /T 16674.2 |
| Hexagon Flange Bolts-fine Pitch Thread - Small Series - Type N | Q 185 |
| Hexagon Flange Bolts - Fine Pitch Thread - Small Series - Type R | GB /T 16674.2 |
| Hexagon Flange Bolts - Fine Pitch Thread-Small Series - Type R | Q 183 |
| Hexagon Flange Bolts - Small Series - Full Shank - Coarse Thread - Product Grade A | JIS B 1189 |
| Hexagon Flange Bolts with Reduced Shank - Coarse Thread - Product Grade A [Table 3] | JIS B 1189 |
| Hexagon Flange Bolts with Reduced Shank - Fine Thread - Product Grade A [Table 6] | JIS B 1189 |
| Hexagon Bolts with Flange - Small Series | GB /T 16674.1 |
| Hexagon Bolts with Flange - Small Series - Full Shank - Product Grade A | GB /T 16674.1 |
| Hexagon Flange Bolts with Full Shank - Coarse Thread - Product Grade A [Table 3] | JIS B 1189 |
| Hexagon Flange Bolts with Full Shank - Fine Thread - Product Grade A [Table 6] | JIS B 1189 |
| Hexagon Bolts with Flange - Metric Fine Pitch Thread - Small Series - Full Shank (Standard Type) | EN 14219 |
| Mushroom Head Nib Bolts | GB /T 15 - 2013 |
| Round Head Nib Bolts | DIN 607 - 1981 |
| Round Head Nip Bolts | CNS 4696 - 1983 |
| Round Head Bolts | NF E 27 |
| Round Head Double Nib Bolts | ANSI B 18.5 |
| Round Head Fin Neck Bolts, (Inch Series) [Table 5] (A307, SAE J429, F468, F593) | ASME B 18.5 |
| Round Head Fin Neck Bolts,(Inch Series) [Table 5] (A307, SAE J429, F468, F593) | ANSI B 18.5 |
| Black Cup Nibbed Bolts for Iron and Steel Work | BS 325 - 1947 |
| Square Lag Screws [Table 14] (ASTM A307 / F593 / F468 / A394) | ASME B 18.2 |
| Square Lag Screws [Table 14] | ASME B 18.2 |
| Woodscrews-Hexagon Lag Screws - Symbol H | NF E 25 |
| Hex Lag Screws [Table 9] | ASME B 18.2 |
| Coach Screws - Metric Series with ISO Hexagon Heads | NZS 1393 - 1996 |
| Metric Hexagon Lag Screws | ANSI B 18.2 |
| ASME B 18.15 |
| Type 2, Styles A and B Shoulder Pattern Eyebolt [Table 2] (A489, F541, A473)(2 versions) | ASME B 18.15 |
| Eyebolt with Link | BS 4278 - 1984 |
| J-Bolts, Offset Round Bend | IFI 136 |
| Dynamo Eyebolt | BS 4278 - 1984 |
| Eye Bolts with Collars | IS 4190 - 1984 |
| Eyebolts, Closed Anchor Ring (F468, F593, F1554, A307, A193/A193M, A320/A320M, SAE J429) | ASME B 18.31 |
| Eyebolts, Open Anchor Ring (F468, F593, F1554, A307, A193/A193M, A320/A320M, SAE J429) | ASME B 18.31 |
| Hook Bolts, Square Bends | IFI 136 |
| Lifing Point | YJT 17023 |
| Self Tapping Screw with Rings | YJT 4001 |
| Shouldered Cup - Hooks | YJT 4081 |
| Swivel Hoist Ring | YJT 17022 |
| Eyebolt for Shackles, Forms BC and SC | JIS B 2801 - 1996 |
| Eyeboltfor Shackles, forms BD and SD | JIS B 2801 - 1996 |
| Eye bolts - Coarse Thread | Q 190 |
| Eye Bolts - Fine Pitch | Q 191 |
| Eye Bolts - Fine Thread | Q 191 |
| Collar Eyebolt | BS 4278 - 1984 |
| EN 14399 |
| Metric 90°Countersunk Head Bolts | BS 4933 - 1973 |
| 100° Countersunk Head Bolts with Cone Point | GJB 3371 |
| 100° Countersunk Head Bolts | GJB 3371 |
| 100° Countersunk Head Bolts, Short Thread, Shank Tolerance h8 | GJB 3371 |
| High-Strength Structural Bolting Assemblies for Preloading - Part 7: System HR - Countersunk Head Bolt | EN 14399 |
| Countersunk Bolts and Slotted Countersunk Bolts,(Inch Series) | ANSI B 18.5 |
| High Strength Slotted Bolts for Steel Structure | NF E 25 |
| 100° Countersunk Head Bolts, Short Thread, Shank Tolerance r6 | GJB 3371 |
| 100° Countersunk Head Bolts with MJ Thread, Cross-recessed | HB 7438 - 2013 |
| GB 5098 - 1985 |
| Railway Track Material - Fishbolts | AS 1085.4 - 2002 |
| Round Head Bolts with Oval Shoulder for Mine Supports | DIN 21547 - 1988 |
| Bolts, Round Head with Oval Neck | GB 8262 - 1987 |
| Elliptic Neck Track Bolts [Table 2] (A449, A354) | ASME B 18.10 - 2006 |
| Black Cup Oval Neck Bolts | BS 325 - 1947 |
| Flshbolt Profile | JIS E 1107 - 2008 |
| GB 12 - 1976 |
| Strenthened Cup Head Square Neck Bolts - Type A | GB /T 794 |
| Strenthened Cup Head Square Neck Bolts - Type B | GB /T 794 |
| ISO Metric Cup Head Square Neck Bolts | NZS 1390 - 1997 |
| Black Cup Aquare Neck Bolts | BS 325 - 1947 |
| Cup Head Square Neck Bolts（with indentation）[Table 3] | JIS B 1171 |
| IFI 544 - 1998 |
| Round Head Ribbed Neck Bolts | ANSI B 18.5 - 2008 |
| Round Head Bolts | GOST 53664 - 2009 |
| Round Head Bolts, (Inch Series) | ANSI B 18.5 |
| Tramway Track Fastenings - Sleeper Bolts | UNI 3698 - 1955 |
| Cup Head Bolts | GJB 3371 |
| Connecting Bolts for Overhead Power Lines - Form S | DIN 48073 |
| Cup Head Bolts with Cone Point | GJB 3371 |
| DIN 7968 - 2017 |
| High Strength Hexagon Fit Bolts with Large Width Across Flats for Structural Steel Bolting | DIN 7999 - 1983 |
| High-strength Structural Bolting Assemblies for Preloading - Part 8: System HV — Hexagon Fit Bolt | EN 14399 |
| High-Strength Structural Bolting Assemblies for Preloading-Part 8: System HV-Hexagon Fit Bolt and Nut Assemblies | NF E 25 |
| Hexagon Fit Bolts with Long Threaded Dog Point | DIN 609 - 1984 |
| Hexagon Fit Bolts | DIN 609 - 1995 |
| Hexalgon Fit Bolts for Structural Steel Bolting for Supply with or Without Nut | DIN 7968 - 1989 |
| Hexagon Head Stiffener Bolts | CNS 3125 - 1980 |
| QC /T 1060 - 2017 |
| E-type TORX Flange Bolts | JASO F 116 - 2005 |
| Bolts and Screws with External Hexalobular Driving Feature with Small Flange | DIN 34800 - 2000 |
| Hexagon Head Flange Bolts - Reduced Shank | GB /T 35481 - 2017 |
| Hexalobular Head Bolts with Large Flange | DIN 34801 - 2021 |
| Bolts with External Hexalobular Driving Feature with Small Flange | DIN 34800 - 2022 |
| ANSI B 18.5 - 2008 |
| Cup Head Square Neck Bolt | JIS B 1171 - 2005 |
| Round Head Bolts with Short Square Neck [Table 2] | JIS B 1171 |
| Cup Square Neck Bolts with Short Neck - Product Grade C | GB 801 - 1988 |
| ASME B 18.6 |
| Plain (Unslotted) and Slotted Regular and Large Hex Head Screws [Table 29] (ASTM F837, F468) | ASME B 18.6 |
| Slotted Hexagon Head Screws for Metal, Product Grade A, Symbol HS | NF E 25 |
| Plain and Slotted Hexagon Head Screws [Table 16] | BS 1981 - 1991 |
| Slotted Hexagon Bolts | GB 29 - 1976 |
| Cross Recessed Hexagon Bolts with Indentation | GB /T 29.2 - 1988 |
| GB /T 16674.3 - 2023 |
| Hexagon Flange Removing Scraps Bolts(2 versions) | QC /T 853 - 2011 |
| Hexagon Bolts with Flange - Small Series - Product Grade A(2 versions) | ISO 15071 - 1999 |
| Hexagon Bolts with Flange, Heavy Series, Full shank(Type S) | EN 1665 |
| Hexagon Bolts with Flange with Metric Fine Pitch Thread - Small Series - Product Grade A | ISO 15072 - 1999 |
| Hexagon Bolts with Serrated Flange for Automobile | QC /T 340 - 2017 |
| Hexagon Flange Bolt - Type 2 - [Attached Table 2] | JIS B 1189 |
| Hexagon Flange Bolts， Waterproof | YJT 10470 |
| Hexagon Flange Bolts with Reduced Shank | DIN 6922 - 1983 |
| Hexagon Head Flange Bolts | ANSI B 18.2 |
| Large Hexagon Flange Face Reduced Shank Bolts | Q 188 |
| Large Hexagon Head Flange Bolts with Reduces Shank - Product Grade B | GB 5790 - 1986 |
| Metric Heavy Hex Head Flange Screws (SAE J1199 / ASTM F568M, F738M, F468M, 8.8, 9.8, 10.9) | ASME B 18.2 |
| Metric Hex Flange Head Machine Screws | IFI 513 - 1982 |
| Construction Machinery and Equipment - High Strength Bolts with Hexagon Flange | JG /T 5057.7 - 1995 |
| Construction Machinery and Equipment - High Strength Bolts with Hexagon Flange - Reduced Shank | JG /T 5057.8 - 1995 |
| Hexagon Bolts with Flange, Metric Fine Pitch Thread,Small Series, Product Grade A | ISO 15072 - 2012 |
| Hexagon Flange Bolt - Type 2 - [Table JA.3] | JIS B 1189 |
| Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) | EN 1665 |
| Hexagon Bolts with Serrated Flange | QC /T 340 - 1999 |
| Hexagon Flange Bolts - Fine Thread | Q 181 |
| Hexagon Flange Bolts - Reduced Shank - Product Grade B | GB /T 5788 - 1986 |
| Hexagon Flange Bolts - Class 2 | JIS B 1189 |
| Hex Flange Screws [Table 8] | ASME B 18.2 |
| Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) | EN 1665 |
| Hexagon Bolts with Flange - Heavy Series | NF E 25 |
| Hexagon Flange Bolts - Product Grade B | GB 5787 - 1986 |
| Hexagon Flange Bolts - Fine Pitch Thread - Product Grade A [Attached Figure 2.1] | JIS B 1189 |
| Hexagon Flange Bolts - Heavy Series - Product Grade B | GB 5789 - 1986 |
| Hexagon Head Flange Face Reduced Shank Bolts | Q 182 |
| Hexagon Head Screws with Flange | MBN 10105 - 2007 |
| Metric Heavy Hex Flange Screws | IFI 538 - 1982 |
| Metric Heavy Hex Head Flange Screws (SAE J1199 / ASTM F568M / F738M / F468M) | ASME B 18.2 |
| Metric Hex Head Flange Screws | ANSI B 18.6 |
| Hex Flange Screws [Table 8]（A394） | ASME B 18.2 |
| Hexagon Bolt with Flange, Heavy Series, Reduced Shank(Type R) | EN 1665 |
| ASME B 18.6 |
| Cross Recess Indented Hex Washer Head Screws [TABLE 2.2.10-2] | ASME B 18.6 |
| Hexagon Bolt with Collar | NF E 27 |
| Hexagon Flange with Flat Upper Face Bolt - Type 1 [Attached Table 1] | JIS B 1189 |
| Hexagon Bolt with flange (Collar) - Type 1 - [Table JA.2] | JIS B 1189 |
| Hexagon Bolts with Collar - Class 1 | JIS B 1189 |
| ISO Metric Small Series Hexagon Washer Head Screws | NZS 1427 - 1996 |
| ASME B 18.2 |
| Steel Structure with High Strength Round Torsional Shear Bolt (ASTM F 1852 / ASTM F 2280) | ASME B 18.2 |
| Twist-Off-Type Tension Control Structural Bolts: Heavy Round Head Configurations (ASTM F3125 / F3125M) | ASME B 18.2 |
| High-strength Structural Bolting Assemblies for Preloading - Torshear Type Bolt with Cup Head | GB /T 32076.8 - 2017 |
| Hexagon Fit Shank Bolts | GB /T 27 - 2013 |
| Hexagon Fit Shank Bolts with Split Pin Hole on Shank | GB /T 28 - 2013 |
| ASME B 18.6 |
| Cross Recess Indented Regular and Large Hex Head Screws | ASME B 18.6 |
| Cross Recessed Hexagon Head Bolts | Q 174 |
| High-Strength Structural Bolting Assemblies for Preloading - System HRC - Bolt HRC with Hexagon Head | EN 14399 |
© 2026 Ningbo Ruixi Metal Surface Technology Co., Ltd.. All rights reserved.