285 specifications across 27 categories
37 specifications
32 specifications
| Product | Standard |
|---|---|
| Parallel Pins(8 versions) | GB 119 - 1986 |
| Parallel Pins, of Unhardened Steel and Austenitic Stainless Steel(4 versions) | GB /T 119.1 - 2000 |
| Parallel Pins, Unhardened(4 versions) | EN 22338 - 1992 |
| Metric Hardened Ground Machine Dowel Pins(2 versions) | ANSI B 18.8 |
| Unhardened Ground Dowel Pins |
32 specifications
| Product | Standard |
|---|---|
| Spring-type Straight Pins - Coiled, Heavy Duty(5 versions) | GB /T 879.3 - 2000 |
| Spring-type Parallel Pins - Coiled, Standard Duty(2 versions) | DIN 7343 - 1969 |
| Spring-type Straight Pins - Coiled, Light Duty(2 versions) | GB /T 879.5 - 2000 |
| Spring-Type Straight Pins - Coiled, Standard Duty(2 versions) | EN 28750 - 1992 |
24 specifications
| Product | Standard |
|---|---|
| Clevis Pins with Head(9 versions) | ASME B 18.8 |
| (3 versions) | TB /T 54 - 1993 |
| Clevis Pins Without Head(2 versions) | NF E 25 |
| Clevis Pins without Head - Form A(2 versions) | EN 22340 |
| Axle with a Safety Ring Groove(2 versions) |
33 specifications
| Product | Standard |
|---|---|
| Spring-type Straight Pins - Slotted, Heavy Duty(2 versions) | ISO 8752 - 1987 |
| Spring-Type Straight Pins-Slotted, Heavy Duty(2 versions) | GB /T 879.1 - 2000 |
| Spring-type Straight Pins-Slotted, Light Duty(2 versions) | GB /T 879.2 - 2000 |
| Slotted Type Spring Pins(2 versions) | ASME B 18.8 |
| Metric Series - Slotted Spring Pins |
31 specifications
| Product | Standard |
|---|---|
| Groovd Pins-Full-Length Taper Grooved(2 versions) | GB /T 13829.5 - 2004 |
| Grooved Pins - Type A(2 versions) | ASME B 18.8 |
| Grooved Pins-Half-Length Reverse-Taper Grooved(2 versions) | DIN 1474 - 1978 |
| Grooved Pins - Half-length Reverse-taper Grooved(2 versions) | EN 28741 - 1992 |
| Grooved Pins - Half-length Reverse Taper Grooved |
1 specifications
| Product | Standard |
|---|---|
| Split Pins, Form W(23 versions) | DIN 48063 |
8 specifications
| Product | Standard |
|---|---|
| Split Pins(14 versions) | ASME B 18.8 |
| (2 versions) | YJT 19099 |
| Metric Cotter Pins - Extended Prong Square Cut Type | ASME B 18.8 |
| Metric Cotter Pins - Hammer Lock Type | ASME B 18.8 |
| Split Pins (Cotter Pins) | UNI 1336 |
11 specifications
| Product | Standard |
|---|---|
| Parallel Pins with Internal Thread, of Hardened Steel and Martensitic Stainless Steel(4 versions) | GB /T 120.2 - 2000 |
| Parallel Pins with Internal Thread(4 versions) | GB 120 - 1986 |
| Parallel Pins with Internal Thread, of Unhardened Steel and Austenitic Stainless Steel(3 versions) | GB /T 120.1 - 2000 |
| Parallel Pins with Internal Thread of Class 2(2 versions) | JIS B 1359 - 1990 |
10 specifications
| Product | Standard |
|---|---|
| Taper Pins with Thread Ends and Constant Taper Lengths(3 versions) | DIN 258 - 2012 |
| Taper Pins with External Thread(3 versions) | GB /T 881 - 2000 |
| Taper Pins with Thread(2 versions) | KS B 1308 - 2000 |
| Taper Pins with External Thread, Unhardened(2 versions) | NF E 25 |
| Morse Taper Pins with External Thread |
7 specifications
| Product | Standard |
|---|---|
| Taper Pins(8 versions) | ASME B 18.8 |
| Taper Pins with Round End(2 versions) | DIN 1 - 1981 |
| Taper Pins, Unhardened(2 versions) | NF E 25 |
| Taper Pins, Unhardened - Type A and B | ISO 2339 - 1986 |
| Taper Bolts | GJB 3371 |
12 specifications
| Product | Standard |
|---|---|
| (3 versions) | QC /T 411 |
| Ball Pin Seat for Motor Vehicles(2 versions) | QC /T 329 - 1999 |
| Screw Type Ball Pin for Motor | Q 745 |
| Screw Type Ball Pin for Motor Vehicles | QC /T 328 - 1999 |
| Twin-balled Pins for Overhead Power Lines | DIN 48059 - 1978 |
6 specifications
| Product | Standard |
|---|---|
| Taper Pins with Internal Thread(6 versions) | CNS 8778 - 1982 |
| Taper Pins with Internal Thread, Unhardened(3 versions) | NF E 25 |
| Morse Taper Pins with Internal Thread | NF E 27 |
| Taper Pins with Internal Thread - Type A and B | GB /T 118 - 2000 |
| Unhardened Taper Pins with Internal Thread |
6 specifications
| Product | Standard |
|---|---|
| Grooved Pins with Round Head(6 versions) | NF E 25 |
| Round Head Grooved Drive Studs(2 versions) | ASME B 18.8 |
| Grooved Pins - with Round Head | GB /T 13829.3 |
| Grooved Pins with Round Head - Full-length Diamond Grooves | ISO 8746 - 2025 |
| Metric Series, Grooved Pins with Round Head, TYPE 46-1 TYPE 46-2 [Table 8] |
8 specifications
8 specifications
| Product | Standard |
|---|---|
| Cotter - Pins(2 versions) | SD 26 - 1982 |
| Safety Lock with Circle Part Type SPA1 Pins | JIS B 1360 |
| Safety Lock with Turning Up Type 1 SPA2 Pins | JIS B 1360 |
| Safety Lock with Turning Up Type 2 SPA3 Pins | JIS B 1360 |
| Snap Retainer Type SPB1 Pins | JIS B 1360 |
5 specifications
| Product | Standard |
|---|---|
| Grooved Pins with Countersunk Head(4 versions) | NF E 25 |
| Grooved Pins with Countersunk Head-A and B Style | ISO 8747 - 1997 |
| Metric Series, Grooved Pins with Countersunk Head, TYPE 47-1 TYPE 47-2 [Table 9] | ANSI B 18.8 |
| Countersunk Head Grooved Pins | DIN 1477 - 1978 |
| Grooved Pins with Countersunk Head - Full-length Diamond Grooves |
3 specifications
| Product | Standard |
|---|---|
| (3 versions) | QC /T 623 - 1999 |
| Spring Cotters | DIN 11024 - 1973 |
| Tractor and Machinery for Agriculture And Forestry-Linch Pins and Spring Pins (IDT ISO 7072:1993) | GB /T 4329 - 2001 |
3 specifications
| Product | Standard |
|---|---|
| Slotted Taper Pins | JIS B 1353 - 1990 |
| Slotted Taper Pins - Old Type | JIS B 1353 |
| Taper Pins with Split | GB 877 - 1986 |
3 specifications
2 specifications
| Product | Standard |
|---|---|
| Threaded Insert, Self-tapping with Safety Groove(2 versions) | YJT 5023 |
| Self-tapping Inserts with Safety Slot | — |
1 specifications
| Product | Standard |
|---|---|
| Grooved T-head Cotter Pins(2 versions) | ASME B 18.8 |
1 specifications
| Product | Standard |
|---|---|
| Wire Thread Insert | — |
| ASME B 18.8 |
| Parallel Pins, of Hardened Steel and Martensitic Stainless Steel (Dowel Pins)(2 versions) | NF E 25 |
| Hardened Ground Production Dowel Pins(2 versions) | ASME B 18.8 |
| Chamfered and Square End Straight Pins(2 versions) | ASME B 18.8 |
| Knurled Parallel Pins | Q 524 |
| Knurled Pin | QC /T 364 - 1999 |
| Hardened Cylindrical Pins. Specifications | GOST 24296 - 1993 |
| Hardened Ground Machine Dowel Pins | ASME B 18.8 |
| Metric Parallel Pin A Type | ANSI B 18.8 |
| Metric Parallel Pin - Type A | ASME B 18.8 |
| Metric Parallel Pins With Split Pin Hole | ASME B 18.8 |
| Parallel Pins - d h11 | UNI 1707 |
| Parallel Pins for Wood Structure | DIN 1052 - 2004 |
| Parallel Pins For Wood Structure | DIN 1052 - 2008 |
| Parallel Pins, Hardened (Dowel Pins) | EN 28734 - 1992 |
| Parallel Pins of Hardened and Martensitic Stainless Steel (Dowel Pins) | ISO 8734 - 1998 |
| Parallel Pins, of Hardened Steel and Martensitic Stainless Steel ( Dowel Pins ) | ISO 8734 - 2019 |
| Parallel Pins, Tolerance h8 | Q 522 |
| Parallel Pins, Type C, Tolerance h11 | Q 523 |
| Parallel Pins,of Hardened Steel and Martensitic Stainless Steel (Dowel Pins) | GB /T 119.2 - 2000 |
| Hardened Ground Machine Dowel Pins [Table2] | ASME B 18.8 |
| Parallel Pins - d h8 | UNI 1707 |
| Parallel Pins, Hardened | JIS B 1355 - 1990 |
| Parallel Pins, Hardened Steel and Martensitic Stainless Steel (Dowel Pins) | ISO 8734 - 1987 |
| Parallel Pins,of Unhardened Steel and Austenitic Stainless Steel | ISO 2338 - 1998 |
| Clevis Pins without Head - Type A | GB /T 880 |
| Cylindrical Pins | UNI 6364 |
| Dowel Pins (Parallel Pins, Hardened） | JIS B 1355 - 2012 |
| Spring-Type Straight Pins-Coiled, Standard Duty(2 versions) | GB /T 879.4 - 2018 |
| Coiled Spring Pins(2 versions) | QC /T 622 - 1999 |
| Coiled-type Spring Pins(2 versions) | ASME B 18.8 |
| Spring-Type Straight Pins-Coiled, Heavy Duty(2 versions) | GB /T 879.3 - 2018 |
| Metric Series Spring Coiled Pins, Standard Duty | ANSI B 18.8 |
| Sping-Type Straight Pins-Coiled,Light Duty | ISO 8751 - 2007 |
| Spirol Pins, Heavy Duty | DIN 7344 - 1969 |
| Spring Parallel Pins - Coiled, Heavy Duty | JIS B 2808 |
| Spring Parallel Pins - Coiled, Light Duty | JIS B 2808 |
| Spring Pins, Coiled, Light Duty | JIS B 2808 |
| Spring-type Parallel Pins - Metric, Coiled, Heavy Duty | ANSI B 18.8 |
| Spring-type Parallel Pins - Metric, Coiled, Light Duty | ANSI B 18.8 |
| Spring-type Parallel Pins - Metric, Coiled, Standard Duty | ANSI B 18.8 |
| Spring-Type Straight Pins – Coiled, Heavy Duty | ISO 8748 - 2007 |
| Spring - Type Straight Pins-Coiled, Heavy Duty | NF E 25 |
| Spring-Type Straight Pins-Coiled, Light Duty | GB /T 879.5 - 2018 |
| Spring-Type Straight Pins - Coiled, Light Duty | ISO 8751 - 2007 |
| Spring - Type Straight Pins - Coiled, Light Duty | NF E 25 |
| Spring-type Straight Pins - Coiled, Standard Duty | GB /T 879.4 - 2000 |
| Spring - Type Straight Pins - Coiled, Standard Duty | NF E 25 |
| Spring-Type Straight Pins-Coiled,Heavy Duty | Q 527 |
| Spring-Type Straight Pins-Coiled,Light Duty | Q 527 |
| Spring-Type Straight Pins-Coiled,Standard Duty | ISO 8750 - 2007 |
| Metric Coiled Spring Pins, Light Duty | ANSI B 18.8 |
| Metric Spring Coiled Pins, Heavy Duty | ANSI B 18.8 |
| Spring Parallel Pins, Coiled, Standard Duty | JIS B 2808 |
| Spring Pins, Coiled, Heavy Duty | JIS B 2808 |
| Spring Pins, Coiled, Standard Duty | JIS B 2808 |
| GOST 9650 |
| Metric Clevis Pin with Head - Type A(2 versions) | ASME B 18.8 |
| Pins with Head for Rail Vehicles | DIN 5526 - 1999 |
| Axle with a Locking Washer | GOST 9650 |
| Clevis Pin with Head | GOST 9650 |
| Clevis Pin with Head - Type A and B | GB /T 882 - 2008 |
| Clevis Pins with Head - Type A and B | ISO 2341 - 1986 |
| Clevis Pins Without Head - Form B | EN 22340 |
| Clevis Pins Without Head(Pins with Split Pin Hole) | GB /T 880 |
| Metric Clevis Pin with Head - Type B | ASME B 18.8 |
| Shackle Pin, Forms BA and SA, and of Round Plug | JIS B 2801 - 1996 |
| Axle with a Locking Washer Groove | GOST 9650 |
| Clevis Pin | SAE J 493 - 1961 |
| Clevis Pins with Small Head; Finish M | DIN 1434 - 1977 |
| Clevis Pins with Small Head; Finish mg | DIN 1435 - 1977 |
| Clevis Pins without Head - Form B | EN 22340 |
| Clevis Pins Without Head （Pins with split pin hole ） | GB /T 880 - 1986 |
| Clevis Pins Without Head - Type A | ISO 2340 |
| Clevis Pins Without Head - Type B | ISO 2340 |
| ANSI B 18.8 |
| Metric Slotted Spring Pins | IFI 512 - 1982 |
| Metric Slotted Spring Pins - Type A | ANSI B 18.8 |
| Metric Slotted Spring Pins - Type B | ANSI B 18.8 |
| Slotted Spring Parallel Pins - Light Type | JIS B 2808 |
| Spring Parallel Pins | UNI 6873 |
| Spring Parallel Pins - Standard Type | JIS B 2808 |
| Spring Pin with Teeth | VSW 12785 - 1971 |
| Spring Pins, Slotted, Heavy Duty | JIS B 2808 |
| Spring Pins, Slotted, Light Duty | JIS B 2808 |
| Spring Pins, Slotted, Standard Duty | JIS B 2808 |
| Spring - Type Parallel Pins | ZQ 4358 - 1997 |
| Spring-type Parallel Pins | ZQ 4358 - 2006 |
| Spring-type Straight Pins | JIS B 2808 - 1978 |
| Spring-type Straight Pins - slotted, Heavy Duty | ISO 8752 - 1997 |
| Spring Type Straight Pins, Slotted, Heavy Type | DIN 1481 - 1978 |
| Spring-Type Straight Pins - Slotted - Light Duty | GB /T 879.2 - 2018 |
| Spring-type Straight Pins - Slotted, Light Duty | ISO 13337 - 1997 |
| Spring-Type Straight Pins-Slotted,Heavy Duty | GB /T 879.1 - 2018 |
| Spring - Type Straight Pins - Slotted,Light Duty | ISO 13337 - 2009 |
| Tooth Slotted Spring Pins - Heavy Type | JIS B 2808 |
| Tooth Slotted Spring Pins - Light Type | JIS B 2808 |
| Spring Parallel Pins - Heavy Duty | JIS B 2808 |
| Spring - Type Straight Pins | KS B 1339 - 2000 |
| Spring-Type Straight Pins (Roll Pins) - Light-Weight Type | DIN 7346 - 1978 |
| Spring-Type Straight Pins - Slotted | EN 28752 - 1993 |
| Spring-type Straight Pins - slotted | GB 879 - 1986 |
| Spring-Type Straight Pins - Slotted, Heavy Duty | ISO 8752 - 2009 |
| Spring - Type Straight Pins - Slotted, Light Duty | ISO 13337 - 2009 |
| IS 7386 - 2005 |
| Grooved Pins - Half-Length Taper Grooved(2 versions) | NF E 25 |
| Grooved Pins, Full Length Taper Grooved | DIN 1471 - 1978 |
| Grooved Pins-half-length Reverse-taper Grooved | GB /T 13829.2 |
| Grooved Pins. Half-Length Reverse-Taper Grooved | NF E 25 |
| Grooved Pins, Half Length Taper Grooved | DIN 1472 - 1978 |
| Grooved Pins-half-length Taper Grooved | GB /T 13829.2 |
| Grooved Pins, Half-Length Taper Grooved | ISO 8745 - 1998 |
| Grooved Pins-taper Grooved, A-style | GB /T 13829.2 |
| Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7] | ANSI B 18.8 |
| Grooved Straight Pins - Type A | SAE J 494 |
| Grooved Straight Pins - Type D | SAE J 494 |
| Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41 | ANSI B 18.8 |
| Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends | ISO 8741 |
| Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends | ISO 8741 |
| Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends | ISO 13670 |
| Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH) | ISO 8744 |
| Taper Grooved Pins - Half-length Progressive Grooves - Pin with Chamfered Ends (CH) | ISO 8745 |
| Groovd Pins - Full-Length Taper Grooved | ISO 8744 - 1998 |
| Grooved Pins-Full-Length Taper Grooved | NF E 25 |
| Grooved Pins - Half-length Reverse-Taper Grooved | ISO 8741 - 1998 |
| Grooved Pins-Half-Length Taper Grooved | ISO 8745 - 1997 |
| Grooved Straight Pins - Type B | SAE J 494 |
| Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6] | ANSI B 18.8 |
| Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends | ISO 13670 |
| Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN) | ISO 8744 |
| Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN) | ISO 8745 |
| Split Pins, Form VN | DIN 48063 |
| Cotter Pins - Metric Series, Hammer Lock Type | ANSI B 18.8 |
| Cotter Pins - Metric Series, Extended Prong Square Cut Type | ANSI B 18.8 |
| Hardened Parallel Pins with Internal Thread | EN 28735 - 1992 |
| Parallel Pins With Internal Thread, of Hardened Steel and Martensitic Stainless Steel | ISO 8735 - 1987 |
| Parallel Pins with Internal Thread of Hardened Steel and Martensitic Stainless Steel | ISO 8735 - 1998 |
| Parallel Pins with Internal Thread, Unhardened | EN 28733 - 1992 |
| Parallel Pins with Internal Thread, Unhardened Steel and Austenitic Stainless Steel | ISO 8733 - 1986 |
| Parallel Pins with Internal Thread-Unhardened Steel and Austenitic Stainless Steel | ISO 8733 - 1998 |
| Parallel Pins with Internal Thread of Class 1 | JIS B 1359 - 2012 |
| NF E 27 |
| Taper Pins with Thread and Constant Taper Length | UNI 7285 - 1974 |
| Taper Pins with Dog Point and Ball Face | JIS B 1358 - 1990 |
| Taper Pins with Thread and Constant Thread Part | DIN 7977 - 1977 |
| Unhardened Taper Pins with External Thread | EN 28737 - 1992 |
| Clevis Pins with Head and External Thread | GB 881 - 1976 |
| Taper Pins [Table1] | ASME B 18.8 |
| Taper Pins Unhardened | EN 22339 - 1992 |
| Angle Joints; Housings, Circlips | DIN 71805 - 1990 |
| Ball Joints with or Without Circlips | DIN 71802 - 1992 |
| Ball Joints for Motor Vehicles - Left-hand Thread | Q 747 |
| Ball Joints for Motor Vehicles - Right-hand Thread | Q 746 |
| Angle Joints with Screw Studs, with Rivet Studs | DIN 71803 - 1988 |
| Ball Joint for Motor Vehicles | QC /T 327 - 1999 |
| Ball Pin Seat for Motor Vehicles - Left Hand Thread | Q 744 |
| EN 28736 - 1992 |
| Taper Pins With Internal Thread - Type A and B | GB 118 - 1986 |
| ANSI B 18.8 |
| Round Head Grooved Pins | DIN 1476 - 1978 |
| Metric Clevis Pin with Head, Type B | ASME B 18.8 |
| Metric Parallel Pins With Split Pin Hole | ANSI B 18.8 |
| Clevis Pin with Head | Q 510 |
| Connecting Bolts For Overhead Power Lines - Form N | DIN 48073 |
| Split Pins for Electric Power Fittings | DL /T 1343 - 2014 |
| Clip Ring Type SPB2 Pins | JIS B 1360 |
| Electric Power Fitting Fasteners Split Pin | DL /T 764.2 - 2001 |
| ISO 8747 - 2025 |
© 2026 Ningbo Ruixi Metal Surface Technology Co., Ltd.. All rights reserved.